Cell balancer and charger in 1
The imax B5 balance has an individual-cell-voltage balancer built in so it does not need a separate balancer when charging Li-Po batteries.
The automatic charge termination program works on the principle of the Delta-peak voltage detection.
The charging capacity is calculated by a multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminate automatically when you set the maximum value.
Charge time limit:
You can also set a maximum charge time to prevent any possible over charge.
Input power monitor:
This function monitors the input voltage from your battery supply and will automatically stop the charger program if your battery falls below the required level.
High-and high-performance circuit
The imax B5 balance charger has a maximum output power of 50W. As a result can charger up to 14cells of Nicd/NiMh and 5series of Li-Po batteries with maximum current of 5.0A.
Computerized balance charging system
Operating voltage range: 10-18V
Circuit power: Max.50W
Charge current range: 0.1-5A
1-5 cell Li-ion/polymer battery
1-14 cell NiCd/NiMH battery
Pb battery voltage: 6V, 12V
New in a box. With cables and english manual